By reducing resistance from laser-formed contacts, Natcore Technology Inc. has achieved an efficiency of 19.4% in its latest demonstration solar cell.
The laser-formed base contact is critical in the Natcore Foil Cell, which is an all-back-contact cell. Higher resistance at this contact, as well as damage from the laser process, has been limiting the performance of the company’s demonstration cells. As a result, improving this contact has been a main focus of their research program. Natcore scientists have just discovered a new laser-based contacting process that overcomes these issues.
Despite only a few runs with this new structure, the device efficiency has already increased by nearly two absolute percent since June, when the company announced an efficiency of 17.5%. Last year, early proof-of-concept cells were delivering 4% efficiencies. At 17.5%, Natcore’s cells were roughly equivalent to typical commercial cells being sold today.
Additionally, cells from the new approach have an open-circuit voltage (Voc) of nearly 0.7V, pointing to the potential of significantly higher efficiencies. “Considering the rapid achievement of these good results, prior even to serious optimization of this new approach, we expect to announce devices soon with efficiencies considerably over 20%,” says Dr. David Levy, Natcore’s Director of Research and Technology. The work was accomplished in Natcore’s R&D Center in Rochester, NY.
“This breakthrough comes at a perfect time,” says Chuck Provini, Natcore’s president and CEO. “Solar stocks are tumbling following Donald Trump’s election because of the perception that government support of the industry through subsidies and tax credits might be rolled back or eliminated. But while this perception may be negative for the solar manufacturing industry as a whole, it’s actually a very positive development for a solar R&D company like Natcore. Technology will be the key driver in the years ahead.
“With subsidies in place, solar manufacturers were under relatively little pressure to innovate, because the subsidies helped keep solar costs at a parity with energy from more traditional energy sources. But Natcore’s focus has always been to provide generational improvements in solar cell performance – significant increases in efficiencies and significant reduction in production costs.
“Our position, if these incentives were to disappear, could not be more advantageous, since cell manufacturers will be forced to consider our technology and to adopt it once available.”
News item from Natcore