Trina Solar, a global manufacturer of photovoltaic modules, solutions and services, teamed with researchers from Trina and Australian National University (ANU) to develop a new high-efficiency solar cell together.
The laboratory scale Interdigitated Back Contact (“IBC”) cell was developed at the Australian National University Centre for Sustainable Energy Systems under a research and development contract with Trina Solar through a collaboration contract with the Solar Energy Research Institute of Singapore (SERIS).
After two years of research, funded by Trina Solar, the ANU has developed, with contribution from Australian consulting firm PV Lighthouse, an IBC silicon solar cell, which was independently tested by the Fraunhofer CalLab in Germany to be able to deliver an efficiency of 24.4%, putting it among the most efficient solar cells to date.
Trina Solar is now developing a commercial version of the IBC solar cell as well as an IBC PV module. The commercial cell has already reached an efficiency greater than 22% for a 125mm by 125mm IBC solar cell, and 238W for an IBC PV module (based on 72 cells), which was independently tested by the National Center of Supervision and Inspection on Solar Photovoltaic Products Quality of China. Though it is currently in laboratory scale, the new solar cell will soon be ready for industrialized mass production.
“This is the highest efficiency independently confirmed for a conventional IBC solar cell to date,” said Professor Andrew Blakers, Director of the Centre for Sustainable Energy Systems at the ANU Research School of Engineering. “The results mean the laboratory cell technology can now be further developed for commercial solar cells. The work is expected to lead to commercial solar cells with improved efficiency, allowing more power to be generated from a given area of rooftop solar module.
“The ANU has been working to develop highly efficient back contact silicon solar cells, which have both positive and negative metallic contacts on the rear surface,” Blakers added. “That allows the surface facing the sun to be uniformly black, without the metal electrodes present on most solar cells. The back contact cell structure enables the end user to gain more electricity per unit area and a more favorable appearance.”
Want more? Try these articles: