A vertical solar array was installed on the side of one of the largest office buildings in Shorewood, Wisconsin. Arch Solar installed a vertical solar array totaling 54 kW on Dominion Properties’ seven-story building.
“Solar represents a huge market opportunity for commercial office locations,” said Mike O’Connor, cofounder of Dominion Properties. “Being an office building — where typical working hours are when the most energy is used — a proportion of the building’s energy will come from solar. This means our tenants can enjoy savings on their energy bills, particularly important today as the cost of energy continues to skyrocket. This project is the first of many, and we hope that it will encourage other developers to make use of otherwise wasted space on high-rise buildings by embracing solar as a clean, cost-saving energy source.”
The installation features 120 solar modules secured using masonry anchors in an array that is 83-ft high by 23-ft wide. The system uses three SolarEdge inverters with Synergy Technology and SolarEdge Power Optimizers which are attached to the modules to optimize module performance.
“This far North in Milwaukee, the ideal installation for modules is at a 23° angle for maximum sun exposure and to help snow clear,” said JD Smith, head of business development at Arch Solar. “However, for wall installations such as the vertical high-rise array with Dominion Properties, this is a more complex challenge, as the modules need to be mounted at a 90° angle. If you don’t want to lose power efficiency, then really SolarEdge’s inverters and Power Optimizers are the only choice. For Dominion Properties, maximizing power generation to ensure maximum savings for tenants was a non-negotiable, so having access to this technology is what made this project possible.”
The SolarEdge inverters include arc fault detection, temperature sensors in the AC/DC terminal blocks, and SolarEdge’s SafeDC function, which automatically reduces the voltage in each solar module to a touch-safe level to enable safe roof access for maintenance teams or firefighters.
“As an installer, safety is always front of mind when it comes to installations for customers – even more so in this case given the central locality of this building,” continues Smith. “Solar inverter technology has made huge strides in this area in recent years, particularly with stricter regulations coming into place. It’s fair to say SolarEdge technology and safety go hand in hand, with some really innovative features to mitigate risk and validated by the relevant certification, which is always helpful in assuring customers.”
News item from SolarEdge
Solarman says
“The SolarEdge inverters include arc fault detection, temperature sensors in the AC/DC terminal blocks, and SolarEdge’s SafeDC function, which automatically reduces the voltage in each solar module to a touch-safe level to enable safe roof access for maintenance teams or firefighters.”
Right, safety, yet the panels are verticle on the wall with converters, fused interconnects and code required RSD for fire safety. One would have to have at least one solar PV installer/technician(s) that can use mountain climbing equipment to repel down to the sixth string from the top of the building and get to the fourth panel over to replace a panel, fused connector or converter that has gone bad. Proof of concept is one way to promote more use of solar PV and in the next breath, one needs to look at the LCOS of energy installations. In Wisconson, the occasional Ice Storm, temperature deltas over years that expand and contract the bolts holding the array verticle can crack, loosen to become three or four tons of falling glass and steel during some freeze and high wind event. I always liked the Engineering term KISS.