Meyer Burger, the Swiss company that, up until recently, produced heterojunction technology (HJT) manufacturing equipment for major solar module brands, is now making its own modules for mass production. The company released its product line today that will be available throughout Europe and in the United States.
Three product lines, all using heterojunction/SmartWire technology in the company’s own production facilities in Germany, have been revealed: traditional white backsheet modules, black backsheet modules and bifacial dual-glass modules.
The modules come with a 21.8% efficiency and reach or surprass 400 W within the “traditional” module size. Meyer Burger is not yet resorting to large cell sizes.
“We optimize our solar modules for maximum energy yield. They bring decisive differences compared to conventional products,” said Moritz Borgmann, responsible for global sales and marketing as Managing Director of Meyer Burger (Industries) GmbH. “The next-generation solar cells, which we interconnect with our proprietary SmartWire interconnection technology, enable our customers to achieve up to 20% higher energy yield on the same roof area.”
The Meyer Burger White, Black and Glass modules are ideal for the rooftop market for residential and small commercial customers. Meyer Burger solar modules feature a homogeneous “full cell” appearance, even though half cells are used. In addition, Meyer Burger employs a special backsheet that increases the robustness and durability of the modules, which come with performance guarantees of more than 92% for the Meyer Burger White and “Meyer Burger Black” after 25 years, and even more than 93% for the Meyer Burger Glass after 30 years. Meyer Burger Glass comes with a bifaciality factor of 90%, with a combined output of over 430 W.
For the sales of its new high-efficiency solar modules, Meyer Burger is working with leading international distributors, including: BayWa r.e., IBC Solar, KdiSolar, Krannich Solar, Memodo, Solarmarkt, Solen Energy Europe and Sonepar Germany. Installers can order from the partners now, with delivery of the first modules starting before the end of July 2021.
Meyer Burger’snew production facilities in Bitterfeld-Wolfen and Freiberg, Germany, will be opened at the end of May and will then gradually start mass production. In the first phase, a nominal annual capacity of 400 MW will be set up, to be expanded to 5 GW by 2026.
Solarman says
Looks like a 72″ by 40″ panel of around 20 square feet. Pretty close to the average 330 Watt 18 square foot panel of the past few years. Up to 430 watts for bifacial.
Reading a recent article of a Government program trying to build a team and capitalize on CdTe thin film technology as a tandem solar PV panel with 30% solar PV efficiency could be a new horizon in solar PV technology. Solar PV tandem could be relatively tuned for different bad gaps of the solar spectrum and using this 20 square foot panel area, could produce a 30% to 35% efficiency PV panel at , 561 watts to 654 watts of solar PV harvest. That would bring a 400 square foot array on one’s roof to provide in a nominal 4 sun hours a day, almost 45kWh to 52kWh. That would be something like an average daily energy needs of the home, with 14kWh to about 21kWh of stored energy for resilience every day. Better energy efficiency of appliances and tight well insulated home envelope and you could eek out more resiliency.